The Amptron® BluEdge 36V 100Ah Lithium LiFePO4 battery is part of Amptron's premium range of smart and exceptionally robust batteries. It features an advanced Battery Management System (BMS) with integrated Bluetooth connectivity. Engineered for durability, the BluEdge series offers 5000+ cycles and is backed by a 5-year Aussie warranty. This model delivers 100A continuous discharge, 200A peak for up to 2 seconds, and comes with an IP67-rated enclosure for superior protection in demanding environments.
Features
The Amptron® BluEdge series represents premium battery range that raises the bar in quality and sophistication. These batteries are designed using only the highest quality components, with innovative features and a robust, tough and highly waterproof construction that meets the modern demand for reliable long-lasting deep cycle batteries. The design includes exceptionally long-life cells backed with a 5-year warranty, and a smart Battery Management system with integrated communication features including Bluetooth, CAN bus and RS485 interfaces.
The BluEdge series batteries are independently tested to comply with the IEC62619 safety standard and are UN38.3 certified. The batteries also comply with all the requirements of the AS/NZS 3001.2:2022 (“Connectable electrical installations and supply arrangements”) standard for RVs, as well as the marine standard AS/NZS 3004.2:2014 (“Electrical installations—Marinas and boats, Part 2: Boat installations”). Our focus on standards compliance gives you peace of mind for the safe, reliable, and compliant performance of the batteries.
![]()
Ultra Safe
The advanced Battery Management Safety System provides comprehensive protection to the battery with high precision configurable protection and monitoring features, that protect the battery and carefully manages the safe long-term performance of each individual cell and the battery pack (or a bank of inter-connected batteries).
THE BMS PROTECTION
-
-
Low Voltage Protection Switch – Automatically disconnects the discharge circuit to prevent damage to the cells if the battery drains below a pre-set voltage.
-
Over Voltage Protection Switch – Automatically disconnects the charging circuit to prevent damage to the cells if the battery is being charged above a pre-set voltage.
-
Short Circuit and Over Current Protection Switch – Automatically disconnects the discharge circuit if the discharge current exceeds pre-set limits.
-
Reverse Polarity Protection Switch – Automatically disconnects the charge and discharge circuits if a reverse polarity condition is detected.
-
Thermal protection – Built-in thermal sensors will automatically disconnect the charge and discharge circuits when excessive temperatures are detected.
The system will also report any alarm and protection statuses through its communication interfaces to allow the user to trouble shoot and identify any issues.
The batteries are independently tested to comply with the IEC62619 safety standard, is 3 certified, and also comply with the requirements of the AS/NZS 3001.2:2022 Connectable electrical installations and supply arrangements standard. giving you peace of mind for the safe, reliable, and compliant performance of the batteries.
Really Smart Communication
The sophisticated Battery Management System (BMS) not only takes care of the safe performance of the batteries, it also gathers detailed information on the battery, such as the Running State, State of Charge (SOC), Voltage, Current, Temperature, individual cell voltages, Alarm / Protection statuses etc. This information can then be accessed externally via Bluetooth with the Android or iOS app, or via the CANBUS and RS485 communication ports for integrated systems. In addition, several models can also consolidate the information of a bank of batteries through inter-connected links, allowing a single “host” battery to act as the communication gateway to the entire bank.
The CANBUS interface is compatible with various inverters, chargers and communication gateways, such as the Victron Multiplus and GX devices to provide enhanced integration.
Dry contact relay outputs are also available on some models, which can trigger an external signal in the event of an alarm condition in the batteries.
For professional installers requiring more advanced integration, the batteries can be connected to a PC via an RS485 communication port, allowing monitoring from PC based software with the ability to make certain advanced adjustments to the BMS parameters, or to develop customised integration via the RS485 communications protocol. The software and communication adapters are available from Amptron to qualified customers.
External Colour Display
An optional colour screen display can be added to the battery system to display battery information. The display will connect to the batteries via the RS485 port and will visually display all key battery parameters to the user.
The display will also have an embedded audible alarm, that will be triggered in the event of a fault/alarm condition. This can be also used to comply with the new marine AS/NZS 3004.2:2014 standard for Lithium-Ion batteries.
Long Life & Warranty
The cell cycle life has been enhanced by newer prismatic cell designs and improved cell management by the new BMS to maximise battery life. Depending on the model, these batteries offer a very long cycle life of between 4000 to 6000 cycles at 100% Depth of Discharge.
The BluEdge series is backed by an Australian based 5-year warranty.
Robust tough design
Enhanced shock and vibration protection is provided via enhanced framing around the cell packs to prevent internal movement of the cells and/or electronics that may result in failures or metal fatigue over time. This makes these models very suitable for applications in rough offroad conditions, marine environments, and industrial applications where a robust construction is required. Amptron takes steps to ensure that all internal wiring is protected, and high-quality internal connectors and bus bars are used so intermittent failure modes are not introduced in harsh environments.
Uncompromised Waterproofing
Amptron has designed a unique triple-layered moisture protection on all models with ABS cases. The triple-layered design provides three barriers against potential moisture ingress:
- A method to inject the sealing adhesives in all seams to minimise the probability of small gaps/air pockets that may allow some moisture or moist air entering the battery case.
- A second sealed layer is installed inside the battery case above the cells and electronics. Should any moisture find a way to penetrate the seams of the outer casing, then this sealed layer provides a second barrier to prevent moisture reaching the cells and electronics.
- Additionally, the whole cell pack and electronics are wrapped in a sealed membrane. Even if any moisture finds a way to penetrate the above two barriers, or if any condensation should form internally in the battery case, then the membrane would protect moisture getting in contact with the cells or electronics.
Use Cases
High-Performance Applications for 36V 100Ah Lithium Power
The Amptron® BluEdge 36V 100Ah LiFePO4 battery is engineered for high-torque, deep-cycle reliability. Its native 36V architecture eliminates the need for complex series wiring, making it the premier choice for marine, motive, and industrial power systems.
1. Professional Marine & Trolling Motors
This battery is the ultimate power source for 36V saltwater and freshwater trolling motors, such as the Minn Kota Terrova, Ulterra, and MotorGuide Xi5.
-
Space & Weight Efficiency: Replaces three bulky 12V lead-acid batteries with a single, lightweight 100Ah unit.
-
IP67 Waterproofing: The triple-layered moisture protection ensures the BMS and cells remain bone-dry in open-cockpit or high-humidity marine environments.
-
Steady Voltage: Unlike lead-acid, this lithium battery maintains 36V+ throughout the entire discharge cycle, ensuring your motor maintains full thrust even when the battery is at 20% state-of-charge.
2. Electric Golf Carts & Utility Vehicles (LSVs)
Upgrade your 36V golf cart (Club Car, EZ-GO, Yamaha) to modern lithium technology for a transformative driving experience.
-
Enhanced Torque: The 200A peak discharge provides the "burst" power needed for steep inclines and heavy loads.
-
Zero Maintenance: No more watering batteries or cleaning acid corrosion from your chassis.
-
Built for Vibration: The BluEdge reinforced internal framing is specifically designed to handle the constant vibration of gravel tracks and turf.
3. Off-Grid Solar & Industrial Energy Storage
For specialized 36V DC off-grid solar arrays and telecommunications infrastructure, the BluEdge 100Ah offers sophisticated integration.
-
Smart Communication: Integrated CANbus and RS485 allow for seamless "handshaking" with Victron GX devices and industrial chargers.
-
Scalable Power: Connect multiple units in parallel to create a massive 36V energy bank for remote cabins or communication towers.
-
Remote Monitoring: Track your system’s health via Bluetooth from your smartphone without needing to be physically present at the battery bank.
4. Commercial Cleaning & Material Handling
Powering industrial floor scrubbers, sweepers, and electric pallet jacks requires a battery that can handle rigorous daily cycles.
-
Fast Opportunity Charging: Lithium allows for rapid top-ups during breaks, unlike lead-acid which requires long, slow cooling periods.
-
5000+ Cycle Life: Lower your Total Cost of Ownership (TCO) by investing in a battery that lasts 10x longer than traditional deep-cycle alternatives.
-
Safety Certified: Fully compliant with IEC62619, ensuring your workplace meets the highest electrical safety standards for lithium-ion storage.
5. Compliance-Ready RV & Caravan Integration
While 12V is standard, many high-end Australian expedition rigs are moving to 36V or 48V systems to run high-load induction cooktops and air conditioning more efficiently.
-
AS/NZS 3001.2:2022 Compliant: Meets all Australian standards for "Connectable electrical installations," ensuring your build is legal and insurance-friendly.
-
External Display Support: Connect the optional color screen to see your exact battery percentage (SOC) and runtime remaining at a glance.
Specifications
Downloads
User Manual
Warranty Statement
