Amptron® BluEdge 12V 200Ah Smart LiFePO4 Battery | 200A Continuous | IP67 | 2,560Wh | Bluetooth + CANbus + RS485
The Amptron® BluEdge 12V 200Ah is for setups that don't compromise. At 2,560Wh of usable capacity with a 200A continuous and 400A peak discharge rating, it powers full-size off-grid caravans, serious overlanding expedition vehicles, and high-capacity solar storage banks with ease. The same IP67 triple-layer waterproofing and fully integrated smart BMS (Bluetooth, CANbus, RS485) of the 100Ah standard model, in a larger form factor that means fewer batteries, simpler wiring, and more power per square centimetre of tray space. For builds that need maximum energy density without compromise, this is the BluEdge.
Features
The Amptron® BluEdge series represents premium battery range that raises the bar in quality and sophistication. These batteries are designed using only the highest quality components, with innovative features and a robust, tough and highly waterproof construction that meets the modern demand for reliable long-lasting deep cycle batteries. The design includes exceptionally long-life cells backed with a 5-year warranty, and a smart Battery Management system with integrated communication features including Bluetooth, CAN bus and RS485 interfaces.
The BluEdge series batteries are independently tested to comply with the IEC62619 safety standard and are UN38.3 certified. The batteries also comply with all the requirements of the AS/NZS 3001.2:2022 (“Connectable electrical installations and supply arrangements”) standard for RVs, as well as the marine standard AS/NZS 3004.2:2014 (“Electrical installations—Marinas and boats, Part 2: Boat installations”). Our focus on standards compliance gives you peace of mind for the safe, reliable, and compliant performance of the batteries.
![]()
Ultra Safe
The advanced Battery Management Safety System provides comprehensive protection to the battery with high precision configurable protection and monitoring features, that protect the battery and carefully manages the safe long-term performance of each individual cell and the battery pack (or a bank of inter-connected batteries).
THE BMS PROTECTION
-
-
Low Voltage Protection Switch – Automatically disconnects the discharge circuit to prevent damage to the cells if the battery drains below a pre-set voltage.
-
Over Voltage Protection Switch – Automatically disconnects the charging circuit to prevent damage to the cells if the battery is being charged above a pre-set voltage.
-
Short Circuit and Over Current Protection Switch – Automatically disconnects the discharge circuit if the discharge current exceeds pre-set limits.
-
Reverse Polarity Protection Switch – Automatically disconnects the charge and discharge circuits if a reverse polarity condition is detected.
-
Thermal protection – Built-in thermal sensors will automatically disconnect the charge and discharge circuits when excessive temperatures are detected.
The system will also report any alarm and protection statuses through its communication interfaces to allow the user to trouble shoot and identify any issues.
The batteries are independently tested to comply with the IEC62619 safety standard, is 3 certified, and also comply with the requirements of the AS/NZS 3001.2:2022 Connectable electrical installations and supply arrangements standard. giving you peace of mind for the safe, reliable, and compliant performance of the batteries.
Really Smart Communication
The sophisticated Battery Management System (BMS) not only takes care of the safe performance of the batteries, it also gathers detailed information on the battery, such as the Running State, State of Charge (SOC), Voltage, Current, Temperature, individual cell voltages, Alarm / Protection statuses etc. This information can then be accessed externally via Bluetooth with the Android or iOS app, or via the CANBUS and RS485 communication ports for integrated systems. In addition, several models can also consolidate the information of a bank of batteries through inter-connected links, allowing a single “host” battery to act as the communication gateway to the entire bank.
The CANBUS interface is compatible with various inverters, chargers and communication gateways, such as the Victron Multiplus and GX devices to provide enhanced integration.
Dry contact relay outputs are also available on some models, which can trigger an external signal in the event of an alarm condition in the batteries.
For professional installers requiring more advanced integration, the batteries can be connected to a PC via an RS485 communication port, allowing monitoring from PC based software with the ability to make certain advanced adjustments to the BMS parameters, or to develop customised integration via the RS485 communications protocol. The software and communication adapters are available from Amptron to qualified customers.
External Colour Display
An optional colour screen display can be added to the battery system to display battery information. The display will connect to the batteries via the RS485 port and will visually display all key battery parameters to the user.
The display will also have an embedded audible alarm, that will be triggered in the event of a fault/alarm condition. This can be also used to comply with the new marine AS/NZS 3004.2:2014 standard for Lithium-Ion batteries.
Long Life & Warranty
The cell cycle life has been enhanced by newer prismatic cell designs and improved cell management by the new BMS to maximise battery life. Depending on the model, these batteries offer a very long cycle life of between 4000 to 6000 cycles at 100% Depth of Discharge.
The BluEdge series is backed by an Australian based 5-year warranty.
Robust Tough Design
Enhanced shock and vibration protection is provided via enhanced framing around the cell packs to prevent internal movement of the cells and/or electronics that may result in failures or metal fatigue over time. This makes these models very suitable for applications in rough offroad conditions, marine environments, and industrial applications where a robust construction is required. Amptron takes steps to ensure that all internal wiring is protected, and high-quality internal connectors and bus bars are used so intermittent failure modes are not introduced in harsh environments.
Uncompromised Waterproofing
Amptron has designed a unique triple-layered moisture protection on all models with ABS cases. The triple-layered design provides three barriers against potential moisture ingress:
- A method to inject the sealing adhesives in all seams to minimise the probability of small gaps/air pockets that may allow some moisture or moist air entering the battery case.
- A second sealed layer is installed inside the battery case above the cells and electronics. Should any moisture find a way to penetrate the seams of the outer casing, then this sealed layer provides a second barrier to prevent moisture reaching the cells and electronics.
- Additionally, the whole cell pack and electronics are wrapped in a sealed membrane. Even if any moisture finds a way to penetrate the above two barriers, or if any condensation should form internally in the battery case, then the membrane would protect moisture getting in contact with the cells or electronics.
Use Cases
The Amptron® BluEdge 12V 200Ah is engineered for power-hungry systems where a single 100Ah battery isn't enough and a dual-battery solution would be too complex. It replaces two 100Ah AGM batteries with a single intelligent unit.
1. Full-Size Caravan & Motorhome Off-Grid Power
This is the single-battery solution for large modern caravans running residential appliances.
-
Air Conditioner Ready: At 200A continuous, this battery can sustain a 12V or inverter-driven rooftop air conditioner for extended periods — the #1 power requirement for Australian caravan owners.
-
Dual-Zone Solar Integration: Pairs with twin MPPT controllers and roof solar panels to fully recharge from 0% in a single day's good sun, eliminating generator dependency at powered-free sites.
-
AS/NZS 3001.2:2022 Compliant: Fully certified for Australian caravan builds — essential for insurance validity and roadworthy compliance.
2. Large 4x4 Expedition Builds
For builds that carry weeks of supplies into remote Australia and can't afford to run short on power.
-
Multi-Day Power Reserve: 200Ah drives a compressor fridge, CPAP, lighting, water pump, and comms equipment for 2–3 days without solar input — critical buffer for overcast outback weather.
-
Winch-Capable Peak Discharge: The 400A peak discharge handles the brutal startup spike of a 12,000lb electric winch, protecting your recovery capability in the field.
-
Parallel Bank Option: Add a second 200Ah unit for 400Ah total with a single CANbus host connection — all visible as one system in the Amptron Link App.
3. Off-Grid Solar Energy Storage
For remote properties, sheds, and off-grid tiny homes that need serious storage behind a Victron system.
-
Victron CANbus Integration: Connects to Victron Cerbo GX, Multiplus inverter-chargers, and MPPT controllers for fully automated state-based charge management.
-
5,000+ Cycle Service Life: At one cycle per day, this battery will still be operating beyond 13 years — a genuinely long-term infrastructure investment.
-
Single-Battery Simplicity: One 200Ah BluEdge replaces two 100Ah units, reducing connection points, cable runs, and potential failure modes in your system.
4. Commercial Refrigerated Vehicles & Mobile Cold Chain
For refrigerated ute bodies, mobile cold-room vehicles, and food service vehicles that need reliable overnight hold.
-
Extended Hold Capacity: 200Ah provides enough energy to maintain a refrigerated compartment at temperature through a full 8–10 hour overnight hold without engine running.
-
Fast Opportunity Charging: Accepts up to 100A charge current for rapid top-up during transit, minimising downtime for delivery fleets.
-
IEC62619 Safety Certified: Compliant with commercial vehicle electrical safety standards for lithium-ion installations.
5. Marine Liveaboard & Extended Passage Sailing
For blue-water cruisers, extended motor vessels, and liveaboard setups that need a serious house bank.
-
Single-Bank Simplicity: One 200Ah BluEdge replaces four 100Ah AGM batteries typically found in a cruising house bank — saving 80–100kg of weight on a critical stability axis.
-
IP67 Below-Waterline Tolerance: The triple-layer waterproofing protects against bilge flooding scenarios that would destroy unsealed alternatives.
-
Marine Standard Compliant: AS/NZS 3004.2:2014 certified with optional RS485 display for audible alarm compliance.
Specifications
Downloads
User Manual
Warranty Statement
