1.Please make sure that the RIVER is off. Then take out the screwdriver from the extra battery module kit, and locate the four screws on the bottom cover.
Note: Please pay attention, and avoid the static electricity during the installation process.
2. Please remove the 4 screws on the bottom cover. The extra battery module should be positioned as shown in the figure.
3. Align the male and female battery sockets, and connect them. Close the bottom cover. Take the four long screws from the kit and screw them on the screw mouth.
4. Put the RIVER upright and turn it on. The extra battery’s ambient light will turn on. On the RIVER’s display, if the extra battery module indicator light is on, then it is activated successfully. If the ambient light or the extra battery module indicator light is not on, repeat the installation steps, and then check the connection.
WHATS IN THE BOX?
- 1x RIVER Extra Battery
- 4 x Long Screws
- 1 x Cross Screw Driver
- 1 x User Guide
||288 Wh (28.8 V)
|Operating Temperature Range
||Charge: 32-113°F / 0-45°C Discharge: -4-140°F / -20-60°C
||11.2 x 7 x 2.3" / 28.5 x 18 x 5.9 cm
||5.5 lb / 2.5 kg
DO NOT use electric devices with bare metal when charging to avoid the risk of electric shock.